| Name | Cervical Retractor Fenestrated Blade |
| Lead Time | Lead time advised within 48 hours of order placement. |
| ;5755-35;5755-36;5755-35_5755-36; | |
| Specialty | Neuro, Ortho & Spine-Retractors |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Tool Tectra |
| Sterility | Non-Sterile |
| Usage | Reusable |
Cervical Retractor Fenestrated Blade
stainless steel, ball snap closure, bluntCervical Retractor Fenestrated Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. Both blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge to prevent trauma and tearing during retraction and the fenestrations increase the surface area over which the pressure is distributed. They are available in variety of sizes and curvatures making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Description
Reviews (0)
Shipping & Delivery
Related products
Cervical Tissue Retractor
SKU:
TT-SI-4462
1 blunt prong, 13.0 mm depth, 5-1/8" (13.0 cm)Â Cervical Tissue Retractor is ideally crafted for soft tissue retraction in the cervical spinal area. This retractor also features one blunt prong that allows for exploration and movement without damage or trauma to surrounding tissue. This can be used in orthopedic neurosurgical procedures such as anterior laminectomies.
Caspar Nerve Root Retractor
SKU:
TT-SI-1255
9-1/2" (24.0 cm)Â Caspar Nerve Root Retractor is an instrument specially made for use in neurosurgical procedures. More specifically this is used in nerve root retraction in procedures such as lumbar discectomy. The retractor blade comes in a variety of widths including: 6.0 mm, 8.0 mm and 10.0 mm making it a highly versatile retractor that can apply a varied amount of pressure depending on the circumstance.
Blount Knee Retractor
SKU:
TT-SI-9471
6.0 mm distal tip, 7" (17.5 cm)Â Blount Knee Retractor is a specialized instrument that is made for use in arthroplasty surgeries. The long narrow portion of this can be slid above the capsular ligament at the joint. It can also be fit around knee implants and thus is suitable for use in knee revision.
Caspar-Type Titanium Spinal Spreading System
SKU:
TT-SI-1765
suitable for dorsal access to the spinal column, interchangeable blades, curved blades allow larger operative area, reduced shadowing during x-ray, unilateral & bilateral access to lamina, lightweight, corrosion resistant titanium Casper Type Titanium Spinal Spreading System a set of instruments and components that is specifically designed for retraction and spreading in orthopedic neurosurgical procedures. This instrument is suitable for dorsal access to the spinal column. It features interchangeable blades which have a slight curvature that allows for a larger operative area and reduce shadowing during x-ray. It allows for unilateral and bilateral access to lamina and is formed from a lightweight, corrosion resistant titanium. It is available as the frame only, blade support with closure, blade supporting with adjustable screw or as a complete set.
Beckmann Laminectomy Retractor
SKU:
TT-SI-7633
hinged arms, 4x4 sharp prongs, 17.0 mm deep, 12-1/8" (31.0 cm)Beckman Laminectomy Retractor is made for use in neurosurgical procedures of the spinal cord. Specifically this retractor can be used in laminectomy procedures in which the lamina of the vertebrate is removed. This retractor can be used to push aside the muscle and soft tissue layers that lie directly above the spinal cord. The ring handles and ratcheting mechanism make it easy to operate manually and to lock into the appropriate width. Additionally this retractor has sharp prongs and hinged arms to keep a firm grip on the tissue it is retracting.
Campbell Nerve Retractor
SKU:
TT-SI-2539
10.5 mm wide blade, 8-7/8" (22.5 cm)Â Campbell Nerve Retractor is specially designed for use in neurosurgical and other procedures that require manipulation and retraction of nerves. This retractor features a ribbed handle from which extends a slightly curved neck and a retraction blade. The slightly sloping the neck gives this an ideal contour for use in the spinal surgery or in craniotomies.
Blade Ejector Forceps
SKU:
TT-SI-7325
for changing blades w/ ball snap system, 4-1/2" (11.5 cm) Blade Ejector Forceps are crafted for use along side a variety of different blades. It is ideally suited for changing blades with a ball snap system, all of which are also available by Surgical. These forceps are hand-crafted by certified instrument makers to conform to the highest standards in instrumentation. This instrument is a valuable addition to any surgical repertoire specifically in quickly and effectively changing blades.
Aufranc Cobra Retractor
SKU:
TT-SI-1492
10.0 mm tip, 10-1/2" (26.5 cm)Aufranc Cobra Retractor is a uniquely designed instrument for use in retraction and elevation of spinal roots. This retractor can be used in many different neurosurgical procedures but is especially useful in spinal surgeries. It features a cobra shaped head which gives it a contour well suited for maneuvering in the vicinity of nerve roots and keeping them protected. Additionally this retractor is available in four different tips making it well suited for any procedure: serrated pointed tip, smooth pointed tip, serrated blunt tip, smooth blunt tip.
Reviews
There are no reviews yet.