| Name | Vertebral Body Dissector (Caspar Type) |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;FF917R;575699;57-5699;5756-99;575700;57-5700;R6391;5757-00;5756-99_5757-00; |
| Specialty | Neuro, Ortho & Spine-Anterior Cervical Fusion Instruments |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Tool Tectra |
| Sterility | Non-Sterile |
| Usage | Reusable |
Vertebral Body Dissector (Caspar Type)
Vertebral Body Dissector (Caspar Type)Caspar Type Vertebral Body Dissector is ideally suited for use in neurosurgical procedures of the spine. A dissector is designed to be inserted between the vertebral bodies to increase the space between two adjacent vertebrae. This increase in space allows for the surgeon to see the surgical field more clearly and also gives adequate space for the procedure to be performed. This dissector is available in small or large making it an adequate fit for a variety of patient needs and surgeon preferences.
Description
Reviews (0)
Shipping & Delivery
Related products
Bone Reduction Forceps
SKU:
TT-SI-9527
Bone Reduction Forceps - Curved Jaws, Speed Lock
curved jaws, speed lock
Bone Reduction Forceps are specially designed for use in surgeries that require manipulation of bone. Specifically these forceps features a curved jaw with some serrations that make it well suited for use in gripping bone. They can aid in approximation of bones in setting and alignment of fractures as well as any other manipulation of bone that require a firm grasp and hold. Additionally these forceps have a speed lock and is available in either 7" or 9" to satisfy any particular patient need or surgeon preference.
Depth Gauge
SKU:
TT-SI-6673
Depth Gauge Depth Gauge is designed for use in a variety of situations, specifically those in which holes are drilled into bone. This gauge can be used to measure the depth of holes that have been drilled such a initial pilot holes or burr holes in surgeries such as craniotomies. This instrument can be used to precisely make holes that are the specific depth that is needed to expose the surgical field without causing undue damage to the surrounding area. This gauge is available in two sizes: small at 13.0 cm and large at 21.3 cm making it suitable for a variety of different surgical scenarios.
Twist Drill
SKU:
TT-SI-1744
Twist Drill
drilling depth 8.0 mm, length 5-3/4" (14.6 cm)
Twist Drill is a unique drilling instrument designed to create new holes to increase access to certain areas such as through the skull to the brain tissue. This instrument is crafted to distribute the force from the center of the drill point out and thus is ideal in creating new holes without the use of pilot holes. A variety of surgeries including craniotomies can benefit from a specialized drill such as this one. Additionally this instrument has a drilling depth of 8.0 mm and a length of 14.6 cm.
Bone Holding Forceps
SKU:
TT-SI-7557
Bone Holding Forceps
delicate, straight, 2x2 teeth, 5.0 mm wide, 7-7/8" (20.0 cm)
Bone Holding Forceps are a general purpose instrument that can be used in many different surgical procedures that require manipulation of bone. These forceps are specifically designed for use in handling delicate bones such as smaller phalangeal and metacarpal bones that require a small circumference tool. Additionally it features 2x2 teeth that allow it to effectively grip the bone without causing puncture to the bone itself.
Bone Graft Harvesting Forceps (Graft Cutter)
SKU:
TT-SI-5725
Bone Graft Harvesting Forceps (Graft Cutter)
adjustable depth control, 8-3/4" (22.0 cm)Bone Graft Harvesting Forceps are designed for use in orthopedic bone grafting procedures. These forceps are designed to harvest portions of bone for use in grafts in other parts of the body or even for use in a different patient. This instrument is also referred to as a graft cutter and comes equipped with an adjustable depth control. These forceps are available either 10.0 mm wide making it appropriate for 9.0 – 12.0 mm grafts or 7.0 mm wide making it appropriate for 6.0 – 9.0 mm grafts.
Bone Hook
SKU:
TT-SI-9131
Bone Hook
sharp, 7" (18.0 cm)Bone Hook is a highly versatile instrument that is ideally used in procedures that require manipulation and handling of bone. It features a sharp bone hook that allows it to effectively grip bones and move them into the desired position. Additionally the shape of this instrument lends it to use in retraction of bone and other hard tissue surfaces to increase access to the surgical field. This hook is available with a phenolic handle or stainless steel t-handle making it able to satisfy and surgeon preference.
Caspar Cervical Vertebral Body Distractor
SKU:
TT-SI-1383
Caspar Cervical Vertebral Body Distractor Caspar Cervical Vertebral Body Distractor is a specialized instrument crafted for use in neurosurgical procedures, specifically those of the spine. A distractor aids in creating separation of joint surfaces without causing rupture of binding ligaments without causing any displacement. This can be used in herniated disc procedures to repair pinched nerves or other procedures of the spine. This instrument is available in either a left or right design.
Bone Awl
SKU:
TT-SI-5459
Bone Awl
5-1/2" (14.0 cm)
Bone Awl can have a wide array of applications in orthopedic and neurosurgical procedures. Generally speaking it is used to create or enlarge holes in bone. Specifically it is ideally used to create pilot holes in vertebrae during spinal surgeries. It can be used in bone grafting procedures where the bone needs to be prodded to assess its condition. This awl features a large teardrop shaped handle that makes it easy to handle manually and maintain a firm grip to increase accuracy.
Reviews
There are no reviews yet.